Strength    TURBINE MIXERS

Sicoma high speed turbine concrete mixerThe high speed turbine concrete mixer, like the others in the family, has been carefully designed and perfected over many years to be fast, rugged and reliable.  The MT turbine mixer is a world class performer in the production of both wet and dry cast concrete.

The MT's mixing action comes from the rotating blades, which are scientifically designed to push the material from the inside to the outside of the chamber and back again, whilst lifting and folding it, mixing the concrete fully in a few revolutions.

The MT's mixing arms are suspended from spring-action mounts, allowing them to ride up and over any possible obstructions without damage.  The large, cool running epicyclical reduction gear is direct driven;  no belts to wear and break.  The mixer can be started with a full load without damage.

      

Other important features and benefits

bullet

Deep mixing chamber is larger than others in its class, ensuring that it can be truly filled to its rated capacity and properly mixed. 

bullet

Performs equally well on full and small partial batches. 

bullet

2-piece body for easy shipping.

bullet

Low profile ideal for low headroom applications.

bullet

Large reduction gearbox and oil bath is cool running, good for the life of the mixer.  Compare with others using small commercial gear units and belt drive, that cannot start with a  full load without breakdown.

bullet

Rubber sealed discharge doors eliminate jamming and leakage of water.

bullet

Optional additional discharge doors, to 4 maximum.

bullet

Fast and complete cleanout without requiring extra cleanout mechanisms.

bullet

Hydraulic door open/close mechanism gives powerful controllable open/close action.

bullet

High-security locking cover latch  disables startup, ensuring safety even if separate lockout switch is overlooked.

bullet

Three types of liner, depending on application.

bullet

Best value for money in its class.

bullet

MixTron microwave moisture sensor and controller is fully compatible - perfect for all dry cast mixes.

bullet Contact us (form below) for detailed facts and full explanation of points above.

Sicoma high speed turbine concrete mixer - internal view

Sicoma high speed turbine concrete mixer - side view

Sicoma high speed turbine concrete mixer - section

Optional skip hoist

Sicoma's matching skip hoist is tailored to the mixer to guarantee "no-problem" installation.  It can be made with any height.  Simplifies loading from a low-profile batch plant, occupies less floor space and creates less dust than conveyor.

Other accessories

Many other Sicoma accessories and our custom plant integration give you a turnkey plant based on proven equipment with unique design features to guarantee perfect performance.

Sicoma turbine concrete mixer with skip hoist

BATCHING CONTROLS

Scale-Tron’s BATCHTRON series controllers take advantage of the MT's high mixing speed to give you more throughput per hour.  Easy to operate and set up, MP’s mixing sequence can be programmed in different ways for different formulas.

TECHNICAL DETAILS, ENGLISH / METRIC:

MODEL LOADING
CAPACITY
cu. yd. /
cu.m.
COMPACTED
YIELD 
cu. yd. /
cu.m.
PAN
DIAMETER
inch /
mm
MIXING
MOTOR
HP /
KW
PLANETARY
SPEED
rpm
MIXING
ARMS/SCRAPER
BLADES
WEIGHT
lb /
kg
MT1500 2.0 / 1.5 1.3 / 1.0 96 / 2442 50 / 37 21 7/2 8378 / 3800
MT2250 3.0 / 2.25 2.0 / 1.5 117 / 2962 75 / 55 21 8/2 10,582 / 4800
MT3000 4.0 / 3.0 2.7 / 2.0 129 / 3266 100 / 75  17 11/2 14,992 / 6800
MT4500 6.0 / 4.5 4.0 / 3.0 162 / 4166 150 / 110 15 14/2 23,810 / 10,800
MT5250 7.0 / 5.25 4.7 / 3.5 162 / 4166 175 / 128 15 14/2 24,471 / 11,100