REDUCTORES Y MOTORES :: FIMET
The PE and PEK series gearboxes are featured by a cast iron single piece housing and are available coupled to compact version motors ( PE ) or coupled to standard motors with B5
flange (PEK).
The standard basic version is foreseen with hollow output shaft in order to have a self-adaptive cantilever installation with simple reaction arm. Thanks to their modular design a lot of technical
solutions are possible : with solid output shaft, with feet, with output flange B5 or B14 flange. The reduction ratios , at 2 or 3 steps according to the different versions , are made with
cylindrical gears with helical teeth, ground or shaved, designed according to ISO 6336 standards. Input shaft versions or units just equipped with coupling flange , without motor , are
available.
The input power goes up to 33 kW , according to the different sizes , and the output torque goes up to 3.000 Nm
The A
series gearboxes are equipped with cast iron housing and are available coupled to standard B5 flange motors. The basic standard version foresees the output shaft hollow type, for a possible
self-adapative cantilever installation with simple reaction arm. Thanks to their modular design , a lot of technical solutions are possible, differently combined: single or double solid output shaft,
B5 output flange, installation on feet fixed to the housing. The reduction ratios , at 2 or 3 steps according to the different versions , are made with Gleason type bevel gears and with cylindrical
gears with helical teeth, ground or shaved, designed according to the ISO 6336 standards. Input shaft or just coupling flange versions, without motors, are possible.
The input power goes up to 37 kW and the output torque goes up to 2.850 Nm , according to the different sizes
TAMAÑOS SERIES RE:
R1E - R2E - R3E - R4E - R5E - R6E - R7E - R8E - R9E - R10E - R13E - R14E - R15E - R25E - R26E - R37E - R48E - R59E - R510E
TAMAÑOS SERIES RKE:
RK1E - RK2E - RK3E - RK4E - RK5E - RK6E - RK7E - RK8E - RK9E - RK10E - RK13E - RK14E - RK15E - RK25E - RK26E - RK37E - RK48E - RK59E - RK510E
The RE and RKE series gearboxes are featured by a cast iron housing , with feet or flange , and are available coupled to compact version motors ( RE ) or coupled to standard motors with B5 flange
( RKE ). The reduction ratios , at 2 or 4 steps according to the different versions , are made with cylindrical gears with helical teeth,ground or shaved, designed according to ISO 6336
standards. Input shaft versions or units just equipped with coupling flange , without motor , are available .
The input power goes up to 90 kW , according to the different sizes , and the output torque goes up to 19.000 Nm.
The worm-wheel
gearboxes are featured by die cast aluminium or cast iron ( size 110 ) housing , are available in 7 sizes which can be coupled to standard motors with B5, B14 or NEMA type flange. The standard basic
version is equipped with output shaft hollow type , for a possible self-adaptative cantilever installation, with simple reaction arm.
Thanks to their modular design , a lot of technical solutions are possible, differently combined: single or double solid output shaft, B5 output flange, installation on feet fit to the housing with
screws.
Additionally to the basic version other solutions are possible in order to get higher reduction ratios : two gearboxes in sequence or the fitting of a pre-reduction unit with cylindrical gears
.
In addition solutions with input shaft or coupling flange , without motor, are possible. The input power goes up to 4 kW and the output torque goes up to 850 Nm , according to the different
sizes.
They are manufactured in 1, 2, 3 or 4 ( with pre-reduction gear ) reduction steps, for input power from 0,7 kW up to approx. 9300 kW. The available output torque goes from 1400 Nm up to 692.000 Nm, with cast iron or fabricated steel housing , according to the different sizes. The gearboxes can be delivered either with coupling flange to motors , direct or through coupling device, or with input shaft , and the output shaft can be hollow type or solid type , single or double.
They are manufactured in 1, 2, 3 reduction steps, for input power from 0,8 kW up to approx. 2300 kW. The available output torque goes from 1100 Nm up to 692.000 Nm, with cast iron or fabricated steel housing , according to the different sizes. The gearboxes can be delivered either with coupling flange to motors , direct or through coupling device, or with input shaft , and the output shaft can be hollow type or solid type , single or double.
|
:: Distribución de 200 Marcas de REDUCTORES :: REPARACIÓN de Reductores :: Suministro Reductores marca BLANCA
:: REPUESTOS para Reductores :: Fabricamos el REDUCTOR que necesites :: REPUESTOS para Maquinaria Obras Públicas
Queremos ayudarte, tanto si trabajas la madera como el metal, el pan, gestionas el agua, el cemento o el hormigón, el campo o cuidas el medio ambiente. Si gestionas. O reparas tu excavadora... CONSÚLTANOS...
¡ RECIBIRÁS AYUDA EXPERTA !